Fence Installers Toongabbie (Cumberland) – Colorbond, Aluminium, Timber

Fences and gates we have built in Toongabbie

What we install in Toongabbie

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use

Local notes for Toongabbie

What we look for at the measure in Toongabbie – mostly flat Cumberland Plain clay; Greystanes and Pemulwuy rise onto Prospect Hill with sloping blocks.

Colorbond fencing pictured from a Toongabbie job.
Knock-down-rebuild and duplex projects around Merrylands and Guildford need new Colorbond on all three boundaries, usually at 1.8 m with a 2.1 m option behind the house.

Toongabbie straddles the boundary of Cumberland City Council and Blacktown City Council; check which council your rates notice names before relying on either set of fence rules.

We are a service-area business: there is no showroom in Toongabbie. We travel to you for a free measure and quote.

Free quote in Toongabbie

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Cumberland City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Cumberland City Council follows the codes; heritage areas in Granville, Auburn and Lidcombe have front-fence controls. Council website.

All Cumberland suburbs →

Nearby areas

All service areas →

Fencing questions in Toongabbie

Do you service Toongabbie?

Yes. Toongabbie is well inside our regular service area and the photos on this page are from jobs there. Site inspections and quotes are free.

Do I need council approval for a fence in Toongabbie?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Cumberland City Council follows the codes; heritage areas in Granville, Auburn and Lidcombe have front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Cumberland City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Toongabbie neighbour, and can quote each side separately if you prefer.

How soon can you start in Toongabbie?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Can you remove the old fence in Toongabbie?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.