Colorbond Fencing Parramatta – Fences, Gates & Repairs by a Licensed Fencer

Fences and gates we have built in Parramatta

Security fence built at Parramatta High School

What we install in Parramatta

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts

Local notes for Parramatta

Local conditions: undulating clay with sandstone in the north (Carlingford, Epping, North Rocks) and river flats along the Parramatta River.

Parramatta is one of the locations listed on our homepage.
Commercial and school fencing is available alongside residential work.
Carlingford and Epping blocks slope – sleeper retaining under the fence is common.

We are a service-area business: there is no showroom in Parramatta. We travel to you for a free measure and quote.

Free quote in Parramatta

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

City of Parramatta Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Parramatta follows the codes; heritage conservation areas in Parramatta North, Harris Park, Epping and Carlingford have front-fence controls. Council website.

All Parramatta suburbs →

Nearby areas

All service areas →

Fencing questions in Parramatta

Do you service Parramatta?

Yes. Parramatta is well inside our regular service area and the photos on this page are from jobs there. Site inspections and quotes are free.

Do I need council approval for a fence in Parramatta?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Parramatta follows the codes; heritage conservation areas in Parramatta North, Harris Park, Epping and Carlingford have front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only City of Parramatta Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Parramatta neighbour, and can quote each side separately if you prefer.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Parramatta for you or your builder to install – ask for a supply-only price on the quote form.

Is the ground in Parramatta a problem for posts?

Undulating clay with sandstone in the north (Carlingford, Epping, North Rocks) and river flats along the Parramatta River. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.