Fencing Marsfield – Colorbond Fences, Gates & Extensions

Fences and gates we have built in Marsfield

Colorbond fence with lattice inserts, Marsfield

What we install in Marsfield

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts

Local notes for Marsfield

What we look for at the measure in Marsfield – undulating clay and shale; sloping blocks toward the Parramatta River at Putney, Gladesville and Meadowbank.

Slate Grey Colorbond and lattice-top fences are both pictured from jobs in Marsfield.
Steeper blocks in the area sometimes need stepped fencing or a small retaining wall.
Sloping river-side blocks use stepped Colorbond and sleeper retaining.

We are a service-area business: there is no showroom in Marsfield. We travel to you for a free measure and quote.

Free quote in Marsfield

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

City of Ryde Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Ryde follows the codes; heritage conservation areas around Eastwood, Gladesville and Ryde have front-fence controls. Council website.

All Ryde suburbs →

Nearby areas

All service areas →

Fencing questions in Marsfield

Do you service Marsfield?

Yes. Marsfield is well inside our regular service area and the photos on this page are from jobs there. Site inspections and quotes are free.

Do I need council approval for a fence in Marsfield?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Ryde follows the codes; heritage conservation areas around Eastwood, Gladesville and Ryde have front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only City of Ryde Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Marsfield neighbour, and can quote each side separately if you prefer.

Which Colorbond colour suits Marsfield?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Ryde; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.

How soon can you start in Marsfield?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.