Fence Installers Castle Hill (The Hills) – Colorbond, Aluminium, Timber

Fences and gates we have built in Castle Hill

What we install in Castle Hill

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use

Local notes for Castle Hill

Ground and access shape the price more than anything else in Castle Hill: rolling shale hills with deep clay; long boundaries, sloping rear yards and plenty of mature trees along fence lines.

Colorbond fence pictured from a Castle Hill job.
Acreage in Dural, Kenthurst and Annangrove combines Colorbond house-yard fencing with rural post-and-rail or tubular entry fencing and automatic gates.

We are a service-area business: there is no showroom in Castle Hill. We travel to you for a free measure and quote.

Free quote in Castle Hill

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

The Hills Shire Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. The Hills Shire Council follows the state codes; rural-residential zones and estate covenants (Box Hill, The Gables, North Kellyville) add conditions. Council website.

All The Hills suburbs →

Nearby areas

All service areas →

Fencing questions in Castle Hill

Do you service Castle Hill?

Yes. Castle Hill is well inside our regular service area and the photos on this page are from jobs there. Site inspections and quotes are free.

Do I need council approval for a fence in Castle Hill?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. The Hills Shire Council follows the state codes; rural-residential zones and estate covenants (Box Hill, The Gables, North Kellyville) add conditions. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only The Hills Shire Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Castle Hill neighbour, and can quote each side separately if you prefer.

How soon can you start in Castle Hill?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Is the ground in Castle Hill a problem for posts?

Rolling shale hills with deep clay; long boundaries, sloping rear yards and plenty of mature trees along fence lines. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.