• If you would like to proceed with our quote. We can arrange a free onsite visit & give an estimated starting date.​

 

• The starting date is subject to the weather.​

​

• We only use Genuine Colorbond Steel (BlueScope Steel Aust) which has lasered insignia embossed into each panel.​​​

 

• All Colours are the Same Cost & choosing a different colour frame to the sheeting is the same cost.​

 

• ​​Every Colorbond Post is set 600mm deep into the soil and at least one full 20 kg Bag of Concrete is used for each hole.​

 

• Colorbond Fencing can be built up to 2.4m in height.​

 

• Heritage Listed Buildings need Council Approval to build Colorbond Fencing.

​

• We can remove an existing Brick Wall.

 

• ​We can ​​remove up to 10 Square Meters of Bonded Asbestos fencing.​​

 

• We can Double Sheet the New Fence or Lattice, making different coloured sheeting or Lattice on either side. The frame (Posts & Rails) will be the same colour on both sides.

 

• It will take approximately 1 to 2.5 days to build a New Colorbond Fence, 30m in length including demolition

     & removal of the existing fencing.  

    

• A Treated Pine Timber Sleeper Retaining Wall will be needed if your ground level is different to the neighbouring property. It is built directly beneath the New Colorbond Fence. The Treated Pine Timber Sleepers we build with are all H4 Standard.

 

• ​​​A Pool Fence must have no more than a 10cm gap between the bottom of the fence & the ground. (Your local Council may have different fence height  

    requirements).

 

• A Pool Gate must be self closing & open away from the Pool area.